For more than two decades, HYPRES has been in the forefront of developing innovative electronics packaging solutions for cryogenic environments. The company has successfully integrated electronic components in very low temperature refrigerated systems dating back to its development of the industry-first Picosecond Signal Processor in the late 1980s.
HYPRES developed specialized electronics packaging expertise in Low Temperature Systems (LTS) in order to integrate the unique digital superconductor electronics produced in its foundry. The lab pioneered and features several one-of-a-kind test capabilities developed for the diverse applications its integrated circuits are integrated into.
The “electronics packaging” team operates from a dedicated, specially equipped laboratory that supports development from 3D CAD drawings to fabrication and testing in a wide variety of cryogenics environments, including very low temperatures where thermal properties and electrical conductivities change dramatically. The team has access to a variety of specialized and custom equipment for low temperature testing including a wide range of turbo pumps, leak detectors, low pressure measurement devices, calibrated thermometers and temperature control systems, test cryostats and cryocoolers.
HYPRES is known world wide for its design and manufacturing capabilities and innovative and proprietary packaging for digital superconducting chips (pictured above integrated onto a unique four-stage 4K Pulse Tube cryocooler) and its multi-line High Temperature System (HTS), still very cold, leads that can be integrated into cryocoolers from virtually any manufacturer.
• Multi-pin LHe probe
— Inserted in a liquid helium dewar, the multi-pin probe allows quick testing of 5mm and 1cm chips at up to 30 GHz clock speed.
(components referenced below can be developed into custom products)
• Multiline HTS leads
These Multiline HTS (High Temperature Superconductor) leads can be installed between two different temperature stages of a cryocooler as DC current leads. They allow extremely low heat leak compared to traditional leads.
• Patented modification on COTS cryocooler
HYPRES developed an add-on module (patent pending) to accelerate the cool down of very low temperature cryocoolers. Implemented on a Sumitomo RDK-101DP cryocooler, it allows rapid thermal cycling between 15Kelvin and the operating temperature of superconducting devices (typically 4.2K).
• Complete cryocooled test bed for superconducting chips
The test bed allows complete testing of superconducting chips at liquid helium temperatures, without the challenges of handling cryogens. It includes a cryocooler equipped with a HYPRES “cryo module”, a temperature control system, a current source and amplifiers. It can be customized according to specific needs (i.e. vacuum pump, number of amplifiers, cryogenic Low Noise Amplifiers).
• Cryo module for ICs
Designed to be thermalized on the low temperature stage of a cryocooler, this module (3D CAD pictured) allows for the testing of superconducting chips at HF frequencies (up to 20 GHz clock speed).
• SQIF magnetometer
HYPRES-developed SQIF sensors, used at liquid Helium temperature, accurately measure the absolute magnetic field.
(1) Webber, Robert J.; Delmas, Jean; Moeckly, Brian H. “Ultra-Low Heat Leak YBCO Superconducting Leads for Cryoelectronic Applications”, IEEE Transactions on Applied Superconductivity, vol. 19, issue 3, pp. 999-100.
(2) R. J. Webber, V. Dotsenko, J. Delmas, A. M. Kadin and E. K. Track “Initial Evaluation of a 4-K 4-Stage Pulse Tube Cryocooler for Superconducting Electronics”, Cryocoolers 15, 2009, 657-665.
(3) Dotsenko, V. V.; Delmas, J.; Webber, R. J.; Filippov, T. V.; Kirichenko, D. E.; Sarwana, S.; Gupta, D.; Kadin, A. M.; Track, E. K. “Integration of a 4-Stage 4 K Pulse Tube Cryocooler Prototype With a Superconducting Integrated Circuit” IEEE Trans. Appl. Supercond. Volume 19, Issue 3, Part 1, June 2009 Page(s):1003 – 1007.
(4) J. Delmas, A.M. Kadin, R.J. Webber, and E.K. Track., “Figures of Merit for Multi-stage Cryocoolers”, Advances in Cryogenic Engineering, vol. 54, pp. 149-156 (2010).
(5) J. Delmas, A.M. Kadin, R.J. Webber, and E.K. Track., “Application of New Figures of Merit for Multi-stage Cryocoolers”, Cryocoolers 16, 2011, 645-653.
(6) R. J. Webber, J. Delmas, and B. H. Moeckly, “Ultra-low heat leak YBCO superconducting leads for cryoelectronic applications,” IEEE Trans. Appl. Supercond., vol. 19, pp. 999–1002, 2009.
(7) D. Gupta, D. Kirichenko, V. Dotsenko, R. Miller, J. Delmas, R. Webber, S. Govorkov , “Modular, Multi-Function Digital-RF Receiver System”, Proceedings of IEEE Applied Superconductivity conference, 2010, to be published.
(8) R. S. E. John, C. S. Thompson, V. V. Dotsenko, J. Delmas, D. Gupta, A. P. Malshe , “Carbon Nanotube Based Polymer Adhesive For Superconductor Multi-Chip Module Packaging” Proceedings of IEEE Applied Superconductivity conference, 2010, to be published.
(9) R. J. Webber, J. Delmas, V. Dotsenko , “YBCO Current Leads In A Cryocooled Superconducting Electronics System” , Proceedings of IEEE Applied Superconductivity conference, 2010, to be published.
(10) V. Dotsenko J. Delmas, R. Webber, J. Tang, S. Goswami, D. Gupta; “Advances In Cryopackaging Of Superconductor Digital Systems”, Proceedings of IEEE Applied Superconductivity conference, 2010, to be published.
(11) V. Vernik, D. E. Kirichenko, V. V. Dotsenko, R. Miller, R. J. Webber, P. Shevchenko, A. Talalaevskii, D. Gupta, and O. A. Mukhanov, “Cryocooled wideband digital channelizing RF receiver based on low-pass ADC,” Superconductor Science and Technology, vol. 20, pp. S323-S327, Nov. 2007.
(12) R. J. Webber, V. Dotsenko, A. Talalaevskii, R. Miller, J. Tang, D. E. Kirichenko, I. V. Vernik, P. Shevchenko, V. Borzenets, D. Gupta, and O. A. Mukhanov, “Operation of superconducting digital receiver circuits on 2-stage Gifford-McMahon cryocooler,“ in: Proc. CEC/ICMC, Chattanooga, TN, July 2007.
(13) O. A. Mukhanov, D. Kirichenko, I. V. Vernik, T. V. Filippov, A. Kirichenko, R. Webber, V. Dotsenko, A. Talalaevskii, J. C. Tang, A. Sahu, P. Shevchenko, R. Miller, S. B. Kaplan, S. Sarwana, and D. Gupta, “Superconductor Digital-RF receiver systems,” IEICE Trans. Electron., vol. E91-C, No. 3, pp. 306-317, Mar. 2008.